MF3304 COMPUTER AIDED DESIGN SYLLABUS | ANNA UNIVERSITY BE MANUFACTURING ENGINEERING 5TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FIFTH SEMESTER BE MANUFACTURING ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS, IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
MF3304 COMPUTER AIDED DESIGN LT PC
3 0 0 3
AIM:
To impart knowledge in the theoretical principles of Computer Aided Design
OBJECTIVE:
To familiarize the student with computer hardware and peripheral
Devices, mathematics of computer graphics, geometric modeling, CAD standards
And to impart fundamental knowledge in Finite Element Analysis
39
UNIT I INTRODUCTION 5
Product Cycle – Design Process – CAD Hardware – Mainframe, Mini, Workstation and
Micro computer Based Systems, Input and Output Devices – Software – Operating
System, Geometric Modeling capabilities – hardware Integration and Networking.
UNIT II COMPUTER GRAPHICS 9
Two dimensional transformations – Transformation of Straight Lines – Rotation –
Reflection – Scaling – Combined Transformations – Translations and homogeneous co
ordinates – Three dimensional transformations – Scaling – Rotation – Reflection –
Translation – Projections – Orthographic and Isometric Projections – Clipping – Hidden
Line and Surface Removal.
UNIT III GEOMETRIC MODELLING 9
Geometrical Modeling – wire frame, models – entities – surface models – entities – solid
models – Entities – Boundary Representation (B-Rep) – Constructive Solid Geometric
(CSG) – Sweep and Analytical Solid Modeling.
UNIT IV CAD STANDARDS 11
Graphical Kernel System (GKS) Programmers Hierarchical Interface for Graphics
(PHIGS), Initial Graphics Exchange Specification (IGES), Standard for Exchange of
product Model Data (STEP), Drawing Exchange Format (DXF), Dimensional
Measurement Interface Specification (DMIS) – Introduction to Drafting and Modeling
Systems.
UNIT V FINITE ELEMENT ANALYSIS 11
Introduction – Procedures – Element types – Nodal approximation – Element matrices,
vectors and equations – Global connectivity – Assembly – Boundary conditions –
Solutions techniques – Interfaces to CAD – Introduction to packages, Case Studies –
Applications.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Ibrahim Zeid, “CAD-CAM Theory and Practice”, Tata McGraw Hill Publishing Co.Ltd.,
1991
2. D.F.Rogers and J.A.Adams, “Mathematical Elements in Computer Graphics”,
McGraw–Hill Book Company, New York, 1976.
REFERENCES
1. P.Radhakrishnan and C.P.Kothandaraman, “Computer Graphics and Design”,
Dhanpat Rai and Sons, New Delhi, 1991.
2. E.Dieter George, “Engineering Design”, McGraw-Hill International Edition, 1991.
3. P.Radhakrishnan and S.Subramanyam, “CAD/CAM/CIM”, Wiley Eastern Ltd., New
Age International Ltd., 1994.
MF3304 COMPUTER AIDED DESIGN LT PC
3 0 0 3
AIM:
To impart knowledge in the theoretical principles of Computer Aided Design
OBJECTIVE:
To familiarize the student with computer hardware and peripheral
Devices, mathematics of computer graphics, geometric modeling, CAD standards
And to impart fundamental knowledge in Finite Element Analysis
39
UNIT I INTRODUCTION 5
Product Cycle – Design Process – CAD Hardware – Mainframe, Mini, Workstation and
Micro computer Based Systems, Input and Output Devices – Software – Operating
System, Geometric Modeling capabilities – hardware Integration and Networking.
UNIT II COMPUTER GRAPHICS 9
Two dimensional transformations – Transformation of Straight Lines – Rotation –
Reflection – Scaling – Combined Transformations – Translations and homogeneous co
ordinates – Three dimensional transformations – Scaling – Rotation – Reflection –
Translation – Projections – Orthographic and Isometric Projections – Clipping – Hidden
Line and Surface Removal.
UNIT III GEOMETRIC MODELLING 9
Geometrical Modeling – wire frame, models – entities – surface models – entities – solid
models – Entities – Boundary Representation (B-Rep) – Constructive Solid Geometric
(CSG) – Sweep and Analytical Solid Modeling.
UNIT IV CAD STANDARDS 11
Graphical Kernel System (GKS) Programmers Hierarchical Interface for Graphics
(PHIGS), Initial Graphics Exchange Specification (IGES), Standard for Exchange of
product Model Data (STEP), Drawing Exchange Format (DXF), Dimensional
Measurement Interface Specification (DMIS) – Introduction to Drafting and Modeling
Systems.
UNIT V FINITE ELEMENT ANALYSIS 11
Introduction – Procedures – Element types – Nodal approximation – Element matrices,
vectors and equations – Global connectivity – Assembly – Boundary conditions –
Solutions techniques – Interfaces to CAD – Introduction to packages, Case Studies –
Applications.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Ibrahim Zeid, “CAD-CAM Theory and Practice”, Tata McGraw Hill Publishing Co.Ltd.,
1991
2. D.F.Rogers and J.A.Adams, “Mathematical Elements in Computer Graphics”,
McGraw–Hill Book Company, New York, 1976.
REFERENCES
1. P.Radhakrishnan and C.P.Kothandaraman, “Computer Graphics and Design”,
Dhanpat Rai and Sons, New Delhi, 1991.
2. E.Dieter George, “Engineering Design”, McGraw-Hill International Edition, 1991.
3. P.Radhakrishnan and S.Subramanyam, “CAD/CAM/CIM”, Wiley Eastern Ltd., New
Age International Ltd., 1994.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...