PE2307 DRILLING FLUIDS AND CEMENTING TECHNIQUES LAB SYLLABUS | ANNA UNIVERSITY B.TECH. PETROLEUM ENGINEERING 5TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FIFTH SEMESTER B.TECH. PETROLEUM ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS, IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
PE2307 DRILLING FLUIDS AND CEMENTING TECHNIQUES LAB L T P C
0 0 3 2
AIM
The main aim of this laboratory is to understand the drilling fluid equipment, Principles and
operation and oil well cement properties.
OBJECTIVES
The objectives of this laboratory are to demonstrate the processes involved in drilling and
cementing operations, introduce laboratory techniques which are used to select and optimize
drilling fluids and cement slurry and to develop interest in experimentation.
1. Drilling Fluid properties measurements using: Mud balance – Determination on density
or weight of a drilling mud.
2. Determination of thickening time of cement slurries using Fann consistometer.
3. Determination and measurement of fluid loss and mud cake properties of a drilling fluid
using a low pressure – Low temperature and High temperature filter and Filter press.
4. Picnometer and F.G.T. meter
5. pH and resistivity emulsion.
6. Test cell meters.
7. Oil well cement properties; measurement of the compressive strength or tensile
strength of the cement at pressure up to 21000 Kpa and maximum temperature of
260oC.
8. Measurement and control of the basic properties of drilling fluids (density, viscosity,
filtration, lubricity and electrochemical properties) and cement slurries (density,
viscosity, filtration, thickening time and mechanical properties).
LIST OF EQUIPMENT
1. Mud balance
2. Picnometer and F.G.T meter
3. Filter press, low pressure – Low temperature and high temperature filters
4. pH meter
5. Test cell meters
6. Fann consistometers
7. Compact Curing chamber
8. Thickening time tester
TOTAL: 45 PERIODS
PE2307 DRILLING FLUIDS AND CEMENTING TECHNIQUES LAB L T P C
0 0 3 2
AIM
The main aim of this laboratory is to understand the drilling fluid equipment, Principles and
operation and oil well cement properties.
OBJECTIVES
The objectives of this laboratory are to demonstrate the processes involved in drilling and
cementing operations, introduce laboratory techniques which are used to select and optimize
drilling fluids and cement slurry and to develop interest in experimentation.
1. Drilling Fluid properties measurements using: Mud balance – Determination on density
or weight of a drilling mud.
2. Determination of thickening time of cement slurries using Fann consistometer.
3. Determination and measurement of fluid loss and mud cake properties of a drilling fluid
using a low pressure – Low temperature and High temperature filter and Filter press.
4. Picnometer and F.G.T. meter
5. pH and resistivity emulsion.
6. Test cell meters.
7. Oil well cement properties; measurement of the compressive strength or tensile
strength of the cement at pressure up to 21000 Kpa and maximum temperature of
260oC.
8. Measurement and control of the basic properties of drilling fluids (density, viscosity,
filtration, lubricity and electrochemical properties) and cement slurries (density,
viscosity, filtration, thickening time and mechanical properties).
LIST OF EQUIPMENT
1. Mud balance
2. Picnometer and F.G.T meter
3. Filter press, low pressure – Low temperature and high temperature filters
4. pH meter
5. Test cell meters
6. Fann consistometers
7. Compact Curing chamber
8. Thickening time tester
TOTAL: 45 PERIODS
No comments:
Post a Comment
Any doubt ??? Just throw it Here...