ML3022 COMPUTER AIDED DESIGN SYLLABUS | ANNA UNIVERSITY BE MATERIALS SCIENCE AND ENGINEERING 8TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY 8TH SEMESTER B.E MATERIALS SCIENCE ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI, TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
ML3022 COMPUTER AIDED DESIGN LT P C
3 0 0 3
OBJECTIVES
Study CAD and its application for drafting, modeling and as a basis for FEM analysis
UNIT I INTRODUCTION 6
Product Cycle – Design process – CAD Hardware – Mainframe, Mini Workstation, Micro
computer Based systems, Input and Output Devices – Software – Operating System,
Geometric Modeling capabilities – Hardware Integration and Networking.
UNIT II COMPUTER GRAPHICS 10
Two dimensional transformations – Transformation of Straight Lines- Rotation –
Reflection – Scaling – Combined Transformations – Translations and homogeneous coordinates
– Three dimensional transformations – Scaling –Rotation – Reflection –
80
Translation – Projections – Orthographic and Isometric Projections – Clipping – Hidden
Line and Surface Removal.
UNIT III GEOMETRIC MODEL 10
Geometrical Modeling – wire frame models – entities – surface models- entities- solid
models –Entities – Boundary Representation (B-Rep)- Constructive Solid Geometry
(CSG ) – Sweep and Analytical Solid Modeling.
UNIT IV CAD STANDARDS 7
Graphical Kernel System(GKS), Programmers Hierarchical Interface for
Graphics(PHIGS), Initial Graphics Exchange Specification(IGES), Standard for
Exchange of product Model Data( STEP), Drawing Exchange Format(DXF), Dimensional
Measurement Interface Specification(DMIS) – Introduction to Drafting and Modeling
Systems.
UNIT V FINITE ELEMENT ANALYSIS 12
Introduction – procedures – Element types – Nodal approximation – Element matrices,
vectors and equations – Global connectivity – Assembly – Boundary conditions –
Solutions techniques – Interfaces to CAD – Introduction to packages. Case Studies -
Applications.
TOTAL : 45 PERIODS TEXT BOOK:
1. D.F.Rogers and J.A.Adams,” Mathematical Elements in Computer Graphics”,
McGraw – Hill Book Company, NewYork, 1976.
2. Ibrahim Zeid, “ CAD –CAM Theory and Practice”, Tata McGraw Hill Publishing
Co.Ltd., 1991.
REFERENCES:
1. P.Radhakrishnan and C.P Kothandaraman,” Computer Graphics and Design”,
Dhanpat Rai and Sons, NewDelhi, 1991.
2. E.Dieter George,” Engineering Design”, McGraw – Hill International Edition, 1991.
3. P.Radhakrishnan and S.Subramanyan,” CAD/CAM/CIM”, Wiley Eastern Ltd., New
Age International Ltd., 1994.
4. Groover and Zimmers,” CAD/CAM: Computer Aided Design and Manufacturing”,
Prentice Hall of India, New Delhi, 1994.
5. V.Ramamurthi,” Computer Aided Mechanical Design and Analysis”, Tata McGraw
Hill Publishing Co Ltd., 1998.
ML3022 COMPUTER AIDED DESIGN LT P C
3 0 0 3
OBJECTIVES
Study CAD and its application for drafting, modeling and as a basis for FEM analysis
UNIT I INTRODUCTION 6
Product Cycle – Design process – CAD Hardware – Mainframe, Mini Workstation, Micro
computer Based systems, Input and Output Devices – Software – Operating System,
Geometric Modeling capabilities – Hardware Integration and Networking.
UNIT II COMPUTER GRAPHICS 10
Two dimensional transformations – Transformation of Straight Lines- Rotation –
Reflection – Scaling – Combined Transformations – Translations and homogeneous coordinates
– Three dimensional transformations – Scaling –Rotation – Reflection –
80
Translation – Projections – Orthographic and Isometric Projections – Clipping – Hidden
Line and Surface Removal.
UNIT III GEOMETRIC MODEL 10
Geometrical Modeling – wire frame models – entities – surface models- entities- solid
models –Entities – Boundary Representation (B-Rep)- Constructive Solid Geometry
(CSG ) – Sweep and Analytical Solid Modeling.
UNIT IV CAD STANDARDS 7
Graphical Kernel System(GKS), Programmers Hierarchical Interface for
Graphics(PHIGS), Initial Graphics Exchange Specification(IGES), Standard for
Exchange of product Model Data( STEP), Drawing Exchange Format(DXF), Dimensional
Measurement Interface Specification(DMIS) – Introduction to Drafting and Modeling
Systems.
UNIT V FINITE ELEMENT ANALYSIS 12
Introduction – procedures – Element types – Nodal approximation – Element matrices,
vectors and equations – Global connectivity – Assembly – Boundary conditions –
Solutions techniques – Interfaces to CAD – Introduction to packages. Case Studies -
Applications.
TOTAL : 45 PERIODS TEXT BOOK:
1. D.F.Rogers and J.A.Adams,” Mathematical Elements in Computer Graphics”,
McGraw – Hill Book Company, NewYork, 1976.
2. Ibrahim Zeid, “ CAD –CAM Theory and Practice”, Tata McGraw Hill Publishing
Co.Ltd., 1991.
REFERENCES:
1. P.Radhakrishnan and C.P Kothandaraman,” Computer Graphics and Design”,
Dhanpat Rai and Sons, NewDelhi, 1991.
2. E.Dieter George,” Engineering Design”, McGraw – Hill International Edition, 1991.
3. P.Radhakrishnan and S.Subramanyan,” CAD/CAM/CIM”, Wiley Eastern Ltd., New
Age International Ltd., 1994.
4. Groover and Zimmers,” CAD/CAM: Computer Aided Design and Manufacturing”,
Prentice Hall of India, New Delhi, 1994.
5. V.Ramamurthi,” Computer Aided Mechanical Design and Analysis”, Tata McGraw
Hill Publishing Co Ltd., 1998.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...